Search     |   Register  |   Sign in 
 

PTZ Dome Mounts

Choose from a variety of wall mounts, corner mounts, pole mounts, ceiling mounts, pendant mounts and over-the-roof mounts for both indoor and outdoor applications. Depending upon the requirements of the application, indoor mounts can be used with or without an optional bubble. The mounts’ innovative end cap and pendant cap design enable the mount and housing to be assembled on the ground, allowing for a safe, quick and efficient installation.
  DescriptionCompatibilityConstructionDimensions
I-Beam Mount AssemblyI-Beam Mount AssemblyThis assembly allows the dome to be suspended from an I-beam; and includes a clamp, pipe tee nipple and flange. The clamp attaches to a 1.25" pipe, provided by the customer, then affixes to the pendant hardware. The housing or dome assembly also mounts to the structure.SpeedDome Ultra Series and IP SpeedDomeSteel and Galvanized steel6 m [max.] x 293 x 127 mm (20 ft [max.] x 12 x 5 in)
Indoor Pendant MountIndoor Pendant MountThis mount suspends a SpeedDome Ultra or a SpeedDome Optima housing from a ceiling or horizontal surface. It can be installed using either 1.25" NPT threaded pipe or rigid conduit, new or existing, up to 10' (3 meters) in length.SpeedDome Ultra, Optima Series and IP SpeedDomePowder-coated aluminum and ABS plastic6 m [max.] x 293 x 127 mm (20 ft [max.] x 12 x 5 in)
Hard Ceiling BracketHard Ceiling BracketThis bracket enables the Top Hat housing to be recessed in the ceiling (requires RHIUTH Top Hat). The bracket is mounted to the Top Hat and installed in a hole cut in the ceiling — perfect for sheet rock, plaster or solid ceilings. The hard ceiling bracket can be installed entirely from below the ceiling; the installer will not have to access the area above the ceiling to install it. SpeedDome Ultra SeriesGalvanized steel212 x 179 x 56 mm
(8 x 7 x 2 in)
Adjustable BracketAdjustable BracketUsed with the RHIUTH Top Hat, this bracket enables the housing to be recessed in drop ceilings that utilize anything other than 2-foot grids. The bracket distributes the weight of the dome and the Top Hat housing across the T-bar framework of the ceiling and is adjustable from 632-1219 mm (24-48 in).SpeedDome Ultra SeriesGalvanized steel180 x 1219 x 100 mm (7 x 48 x 4 in)
Tile MountTile MountThis mount enables the Top Hat housing to be recessed in a 2' x 2' drop tile ceiling. The ceiling tile is removed and the white tile mount is simply dropped in its place. A Top Hat housing and plastic base are included in the kit. SpeedDome Ultra SeriesPowder-coated aluminum and ABS plastic190 x 607 x 607 mm
(7 x 24 x 24 in)
Tile Pendant MountTile Pendant MountThis mount enables the pendant mount to be installed in a 2' x 2' drop tile ceiling. The Top Hat housing/dome assembly also mounts to the structure. The mounting kit includes a 2' x 2' plate and pendant hardware. The plate attaches to a 1.25" pipe, provided by the customer, then affixes to the Top Hat housing/dome assembly. If mounting a SpeedDome Optima with this model, a RHOPN ceiling pendant mount kit is required. SpeedDome Ultra and Optima SeriesPowder-coated aluminum and ABS plastic47 x 605 x 605 mm
(2 x 23 x 23 in)
Tile Mount PlateTile Mount PlateThis mount enables the dome to be recessed in a 2' x 2' drop tile ceiling. The ceiling tile is removed and the tile mount is simply dropped in its place.SpeedDome Optima SeriesPainted aluminum47 x 605 x 605 mm
(2 x 23 x 23 in)
Mounting Plate 3.5 inchMounting Plate 3.5 inchThis mounting plate attaches the dome to a standard 3.5" x 3.5" duplex electrical box that is installed in the ceiling. The Top Hat housing/dome assembly also mounts to the structure.SpeedDome Ultra Series and IP SpeedDomeGalvanized steel2 x 90 x 90 mm
(.08 x 3 x 3 in)
Mounting Plate 4 inchMounting Plate 4 inchThis mounting plate attaches the dome to a standard 4" x 4" duplex electrical box that is installed in the ceiling. The Top Hat housing/dome assembly also mounts to the structure.SpeedDome Ultra SeriesGalvanized steel2 x 105 x 105 mm
(.08 x 4 x 4 in)
Wall/Corner Mount ShortWall/Corner Mount ShortThis mounting structure attaches directly to a flat wall, inside corner or outside corner. The Top Hat housing/dome assembly mounts to the structure for a quick and easy installation.SpeedDome Ultra SeriesGalvanized steelWith dome installed 224 x 101 x 201 mm
(9 x 4 x 8 in)
Wall/Corner Mount Long Wall/Corner Mount Long This mount, 24" (.6 m), positions the dome away from the wall, enabling it to see over furniture, shelving and displays. It attaches directly to a flat wall, inside corner, or outside corner. The Top Hat housing/dome assembly also mounts to this structure.SpeedDome Ultra SeriesPainted steelWith dome installed 413 x 123 x 772 mm (17 x 5 x 31 in)
Wall Mount End Cap Assembly ShortWall Mount End Cap Assembly ShortThis mounting structure attaches directly to a flat wall. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter it can be affixed to corners as well as poles. A mounting cover conceals the mounting plate for a more attractive appearance.SpeedDome Ultra, Optima Series and IP SpeedDomePowder-coated aluminum, ABS plastic and fiber-filled PVCWith dome installed 366 x 218 x 282 mm (14 x 9 x 11 in)
Wall Mount End Cap Assembly LongWall Mount End Cap Assembly LongThis mount attaches directly to a flat wall, positioning the dome away from the wall, so that it can see over furniture, shelving and displays. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter it can be affixed to corners as well as poles. A mounting cover conceals the mounting plate for a more attractive appearance.SpeedDome Ultra, Optima Series and IP SpeedDomePowder-coated aluminum, ABS plastic and fiber-filled PVCWith dome installed 366 x 218 x 282 mm (14 x 9 x 23 in)
  DescriptionCompatibilityConstructionDimensions
Outdoor Wall Mount End Cap Assembly ShortOutdoor Wall Mount End Cap Assembly ShortThis mounting structure attaches directly to a flat wall. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter it can be affixed to corners as well as poles. A mounting cover conceals the mounting plate for a more attractive appearance.SpeedDome Ultra Series and IP SpeedDomePowder-coated aluminum, ABS plastic and fiber-filled PVCWith dome installed 366 x 218 x 282 mm (14 x 9 x 11 in)
Outdoor Wall Mount End Cap Assembly LongOutdoor Wall Mount End Cap Assembly LongThis mount attaches directly to a flat wall, positioning the dome away from the wall, so that it can see over furniture, shelving and displays. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter it can be affixed to corners as well as poles. A mounting cover conceals the mounting plate for a more attractive appearance.SpeedDome Ultra Series and IP SpeedDomePowder-coated aluminum, ABS plastic and fiber-filled PVCWith dome installed 366 x 218 x 587 mm (14 x 9 x 23 in)
Over-the-Roof Mount with End Cap AssemblyOver-the-Roof Mount with End Cap AssemblyThis mount affixes directly to any wall, rooftop wall or parapet, positioning the dome away from the wall, so that it can see over awnings, soffits and landscaping. Opposing wing brackets secure installation to the roof surface, while allowing the pole to be repositioned for easy service access.SpeedDome Ultra Series and IP SpeedDomePowder-coated aluminum, ABS plastic and fiber-filled PVC1098 x 243 x 473 mm (43 x 10 x 19 in)
  DescriptionCompatibilityConstructionDimensions
Outdoor Wall Mount End Cap Assembly ShortOutdoor Wall Mount End Cap Assembly ShortThis mounting structure attaches directly to a flat wall. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter it can be affixed to corners as well as poles. A mounting cover conceals the mounting plate for a more attractive appearance.SpeedDome Ultra Series and IP SpeedDomePowder-coated aluminum, ABS plastic and fiber-filled PVCWith dome installed 366 x 218 x 282 mm (14 x 9 x 11 in)
Outdoor Wall Mount End Cap Assembly LongOutdoor Wall Mount End Cap Assembly LongThis mount attaches directly to a flat wall, positioning the dome away from the wall, so that it can see over furniture, shelving and displays. When used with the RHOWCA corner bracket adapter or RHOWPA pole strap adapter it can be affixed to corners as well as poles. A mounting cover conceals the mounting plate for a more attractive appearance.SpeedDome Ultra Series and IP SpeedDomePowder-coated aluminum, ABS plastic and fiber-filled PVCWith dome installed 366 x 218 x 587 mm (14 x 9 x 23 in)
Over-the-Roof Mount with End Cap AssemblyOver-the-Roof Mount with End Cap AssemblyThis mount affixes directly to any wall, rooftop wall or parapet, positioning the dome away from the wall, so that it can see over awnings, soffits and landscaping. Opposing wing brackets secure installation to the roof surface, while allowing the pole to be repositioned for easy service access.SpeedDome Ultra Series and IP SpeedDomePowder-coated aluminum, ABS plastic and fiber-filled PVC1098 x 243 x 473 mm (43 x 10 x 19 in)
 Data Sheets
 Knowledge Base Article
 Manuals
 Technical Bulletins
 Technical Drawings




x

Slavery and Human Trafficking Policy and Statement

This policy and statement make explicit our commitment to ensure that slavery and human trafficking is not taking place in any part of our business or supply chain.

Download policy.

Download statement.